Company News
  • personalized fathers day gifts More with the Silhou
  • personalized fathers day gifts More Toxic Chemicals
  • personalized fathers day gifts More than 50 Fun Beg
Contact Us

Email:

Tel:

personalized fathers day gifts How to Install Recessed Lighting Like a Pro! pillow covers geometric

Updated: 2020-03-29 21:36 Views: 186

Electrical work seems scary for any weekend DIY-er. It’;s inherently daunting, because it’;s not a project that many of us know much about or even want to tackle. However, once you learn how to plan your project, and learn where your breaker box is, it’;s so easy! In a few easy steps, you will see how to take an old light and turn it into recessed lighting that works better for your home.

You guys, some times less is more…;. way more! I’;ve recently described the multitude of flushmount lights hanging around the house. The home builder was gracious to give us the same light for every room despite its intention.

pillow cover home decor

It’;s maddening. Some of the lights are in a small space together. Rather than spend lots of money to replace them to something more visually appealing, I thought that we should take a step back and just remove the flushmounts! Jordan probably thought I was 110% weirder than usual. My request?

Changing the flushmount lights into recessed lighting!

First, we need to take a look at the before. These lights are in the hallway leading to our family room. See the absurdity of the two lights only a few feet from one another? Sheesh. While I love pretty new lightingpersonalized fathers day gifts, the thought of twolights so close to each other seems distracting.

The second floor hallway has 4 flushmount lights installed. You can see 3 of the 4 below. The 4th light is behind me and to my right.

We decided to change out the two middle upstairs hallway ones into recessed lighting, too. Now, future plans include upgrading the lights on either end of the hall way rather than replacing all 4 with the same pretty new lights.

Jordan wouldn’;t let me document him changing out the light over the stairs. Just so you know, it was pretty terrifying watching him change out the lighting 18 feet in the air…; over the stairs!

This post contains affiliate links. If you shop from my blog, I may be compensated for clicks or purchases that you make. Thank you for supporting ‘;Our Home Made Easy!’; Read my disclaimer page for more information.

Optional: For things around the house, we rely heavily on this little platform. It raises us 3 feet in the airand then we can reach everything! Jordan used it for both the downstairs and the upstairs hallway lights. The platform is just one of those nice to haves that we never expected to use so much.

First you need to cut the power to the source. This seems like such common sense, until you forget it. Do not forget turning off the power! That is one thing I love about living with an engineer, he always remembers these silly steps that I sometimes forget about!

Next, remove the current light. This is easier than you think! Start by loosening the screws of your current light. Then, twist the fixture slightly until is comes loose from the ceiling (your model may require removing the screws completely).

Then, remove the current installed mounting bracket (the small flat rectangular piece) and keep all the brackets and screws with the light in case you need it later for another project. Once the light is physically separated from the ceiling, carefully lower the fixture.

Now you will want to remove the electrical connections. Be careful to support the light so that when you remove the connections, the light does not fall to the floor.

Remember, typically, your hot wire is black, neutral is white, and or bare is your ground. Your color scheme may be different based on where you live or when your home was built. Always consult with a licensed electrician if you are unsure!

Next, you need to remove the ceiling electrical box. Depending on the light’;s location and mounting type, this can be easy or a touch more difficult. The easier way? Attic access to pull out the electrical box and adjustable hanger (shown below).

The more difficult route? Removing the housingfrom under the light, especially since you may have to cut some of the electrical box away or cut more drywall than desired.

Next, you will want to decide if you need an insulation housing or not. For example, our first story retrofit did not use an insulation housing because it’;s not covered by insulation between the two stories. However, the second story recessed lighting housing is covered in insulation in the attic, so it needed the insulation-style housing.

Once you have your housing, open the package and find the stencil for cutting out drywall. Carefully cut the drywall using a drywall saw. When Jordan did this my eyes became huge. The mess was far worse than the hole itself! By the time the fourth light was cut, I was used to it.

Thankfully the drywall &; dust cleans up well with a vacuum and baby wipes (on the hard woods).

Once you have a hole cut to the proper diameter, its time to begin wiring. First you need to remove one of the knockouts to feed the wiring through.

Make sure you use a NM/SE connector or bushing, per your local code, to protect the wires that will be fed through the knockout. Connect your wiring, black to black, white to white, and green/bare to green/bare.

Next you will insert the housing into the ceiling hole. With the junction box first, push the housing flush to your ceiling. Push thespring clips into place until they snap in place.

And now you are ready to insert your trim. We chose these recessed lights because they are completely enclosed. There are lots to choose from online.Another benefit of the ones we chose are that they are LED. In cases where we have an 18 foot ceiling (like the staircase), we needed to install lights that wouldn’;t burn outregularly!Ta-da! Here is the finishedrecessed lightingon the second floor! Nextproject up here will be to replace the flushmountsstill remaining.And the after on the first floor. Now the lights aren’;t the focal point. Everything seemsa little more open!

Hopefully you see that any weekend DIY-er can easily swap out lighting–; on their own! Be sure to find which electrical housing you need, turn off the power, and get to changing out the outlets!

pillow covers geometric

This Travel Shoe Bag Tutorial project is from?Linda Chang Teufel from Dragon Threads Ltd.

It is my passion to recycle things. whatever possible. So before and after is the contest ,which is very close to my soul, I am thankful to INSTRUCT ABLE, to consider recycling as contest. Thanks to organizer again.

If you’ve been following our Sew Easy Holiday Gift posts, we’ve already shared our favorite projects for decorating your “Home for the Holidays” and staying fashionable by getting “All Decked Out for the Holidays.” Now we’re showing you some creative ways to wrap up those handmade?presents to make them “sew” unforgettable gifts!

Previous: personalized fathers day gifts Free-Motion Quilting Scissors Pincushion Tutorial decorative pillow shams
Next: personalized fathers day gifts How to Join Quilt Blocks with a Spanish Hemstitch decorative pillow shams