personalized fathers day gifts DIY Scallop Fabric Banner &； Cricut Maker Giveaway customized gifts for mom
Today I have a fun Christmas craft idea for you， a DIY Scallop Fabric Banner. I made it using my new Cricut Maker machine AND guess what？ I’；m giving away a machine to one lucky reader! Keep reading to find out more. Disclosure： I work as a Brand Ambassador for Cricut and this post contains affiliate links.？
Last month I briefly introduced you to the Cricut Maker machine. Today I’；m going to “；dive”； in a bit deeper into how the machine works. If you’；d like？to？read my intro post you can do it by CLICKING HERE.decorative pillow shams
If you don’；t want to read it let me “；sum up”； *wink*. The new Cricut Maker machine has a rotary blade attachment and can CUT FABRIC!
If you buy a Cricut Maker machine one of the first things you will notice is that there are two “；basic”； ways to use it. The first way？is to design your own project either using their library of images， fonts on your computer or images that you upload. The second way is to make a pre-designed project that is available in the Cricut Design Space. These types of projects are called Make it Now Projects. They vary from Halloween t-shirts to Christmas pillows to Birthday cards.
Make it Now projects have done all the work for you. All you do is click “；make it”；. Then follow the prompts on the screen. You don’；t have to mess with the software at all.
There are HUNDREDS of Make it Now projects， and guess what？ A lot of them are FREE!
When the Cricut Maker was released they added a bunch of new Make it Now projects to the Design space that was specifically designed to work with the new Maker machine. I got together with a group of over 50 bloggers and we each decided to “；try out”； one of the FREE Make it Now projects!？ Each blogger is making the project， sharing their thoughts on the project and offering you a few fun tips if you decide to make it yourself. How cool is that？
As a part of this project， we’；ve also teamed up to giveaway a Maker machine! You can enter by following the directions at the bottom of this post. You can also see the links to ALL 50 projects there as well.
The project I chose to make was this fun Vintage Fabric Bunting Banner. If you have Cricut Design space account you can see this project in detail by CLICKING HERE.
Before I started I made a note of the required materials， then clicked “；Make it”； just to get a general idea of how the project worked. I noticed when looking at the project the cuts needed for the project were less than 10×；10. Immediately I knew that I could use a pre-cut 10″； stacker of fabric for the project!
Last Christmas I bought a 10″； stacker of Pixie Noel and I knew that it would be perfect for this project.
After I gathered my supplies I opened the design space again and clicked “；Make it Now”；. It brought me to the screen above. That screen told me that I’；d need 22 squares of fabric and a Cricut Fabric Marking Pen.？ Guess what？ If you’；re new to sewing and have no idea what a seam allowance ispersonalized fathers day gifts， the machine has done the work for you and will DRAW the stitching line onto your project for you! So all of you that email me and say that you could NEVER sew， well guess what you can， just cut it out with the machine and sew ON THE LINE!
If you’；re more experienced or don’；t want to use that feature， just unclick the “；mark fabric”； button on that screen.
I loaded my first 10″； square onto the fabric mat， right side down， then told the machine what type of fabric I was using (I used the “；Medium Fabric， like cotton”； setting). The machine the prompted me to load my mat， install the rotary blade and fabric pen.
After I loaded the mat， I hit the blinking light and it started to work!
Each time it finished cutting it prompted me when to remove the mat， and when to put in a new mat. All in all， I cut 88 pieces of fabric in a short amount of time. As you can see from the photo below the shape is not one that can easily be cut with a rotary cutter and I would have NEVER tried this project otherwise. Too much cutting.
One thing to note， it looks like it doesn’；t cut anything at first， then you peel the fabric away and you can see that it did! Also， you’；ll notice that I have a lot of fibers on my mat. That’；s okay. You don’；t have to clean the mat between cuts. Just put the next piece of fabric down and keep cutting.
In the end， I had 88 pieces cut. Enough for two banners with 22 scallops per banner. I decided to instead make 4 banners with 11 scallops per banner. Doing it that way each banner was about 1 yard long. I think these cute little banners would make adorable Christmas gifts!
After I finished cutting， I simply stitched the pieces together then turned them right side out， and stitched them to the bias tape. All of the instructions for the “；sewing”； part of the project are included as well!
A few tips：
Since it’；s cutting 22 mats of the same shape， flip your mat as you cut so you don’；t wear a certain section out too much. Also， you can manually move the scallops around on the mat， just click on them and drag them. I’；d move them around a bit just to keep the cutting lines varied as well.
If you don’；t want to cut SO many scallops， just click CANCEL when you’；ve got as many as you need. Each scallop takes 2 pieces， one for the front and one for the back.
Personally， I can’；t believe that I ACTUALLY made something for Christmas before December 15th! I’；m the worst at leaving things to the last minute at Christmas.
If you’；re interested in a Cricut Maker machine， you purchase them online at Cricut.com
If you’；re looking for the fabric I used today， it’；s called Pixie Noel and you can buy it on etsy.
Want to check out the other 49 FREE projects included with your Cricut Maker？! Click the pictures below to see how some of my blog buddies created these projects with their Maker!
Want to make these projects but don’；t have a Maker yet？ Enter through the widget below to not only win the new Cricut Maker but also the HSN bundle being released tonight at midnight!
a Rafflecopter giveaway
Giveaway open to residents in the US and Canada ages 18 years and older. Giveaway runs from 10/2/17-10/9/17 and winner will be notified by email no later than 10/10/17. Winner will have 48 hours to respond or a new winner will be chosen.
We’re always looking at design through the lens of simple, modern living. Sometimes we find those special pieces that truly spark curiosity and invite conversation. That’s certainly the case with the work of Andrew Molleur, a Kingston, New York, designer and ceramicist. His creations – particularly the Oblique Planters and Carrara Serving Bowl and Platter that Unison carries – strike a balance between fine art and functional design, with an underpinning of modernism.
Today I’m excited to share with you the 3rd block in our Just for Fun Quilt Along. This block is called Sunshine and Stars. If you’re new here, welcome! You can jump right into the quilt along.
I am so pleased to bring you another DIY project this week. Let me give you some backstory. I love the idea of chalkboard signage at weddings. It brings a little rustic chic detail to this special event. However, some chalkboards can be up to $50 or more! Being the budget-savvy bride that I am, that just wasn't going to cut it! So I started looking for inexpensive frames or mirrors I could repurpose.